Skip to content

Cart

Your cart is empty

Article: Silk Screening with Adhesive Stencils

Silk Screening with Adhesive Stencils

Normally, silk screening (also called screen printing) is a process involving chemicals, light sensitive materials and lots of setup. We’re going to show you how easy and accessible silk screening can be with the use of our adhesive stencils! 

Adhesive stencils work very well for all types of fabric projects such as this apparel tutorial. By placing an adhesive stencil on a silk screen, we’ll be able to mimic the classic silk screening method without using any chemicals or complicated techniques. It’s an easy and affordable way to put any design onto a t-shirt or other fabric. 

We made this awesome bucket hat with our finished fabric! This is just one example of all the possible ways you can utilize this technique. We used it to make the design on the fabric, which we then sewed into a summery bucket hat. 

 How to Silk Screen Fabric with a Stencil

Finished worm bucket hat

Materials:

Usually, silk screening can be an expensive process. By using an adhesive stencil, you can cut down on the cost of burning the mesh of the screen. Traditionally, a design is burned into the screen’s mesh and therefore can only print that one design until the mesh is replaced. With stencils, you can simply remove the stencil and place a new one. It’ll decrease your cost over time because you will not need to replace the mesh as often (and decrease your time spent replacing the screen!). 

Let’s get started. 

Step 1: Set-up your materials

If you’ve never used adhesive stencils before, we recommend checking out this article on them first. You’ll learn the basics of handling them as well as their advantages. 

Clamping down fabric to table

The only prep your fabric needs is for it to be ironed. A flat surface will be the easiest to print onto. I clamped the fabric down onto a table so it wouldn’t slip, any kind of clamp will work. 

You can also prep your paint. I mixed white and red to make an appropriate pink for my project. 

Mixing printing ink

Step 2: Place your stencil on the silk screen

When ordering your stencil, we recommend ordering the same size design as your screen if you are planning on making a repeating pattern. If you need help peeling your stencil from its backing, check out our video on this page.

Placing an adhesive stencil

Once the stencil is peeled and carefully placed on the backside of the screen, make sure to smooth down the stencil as much as possible in order to prevent paint bleed. 

Step 3: Pull ink across the silkscreen 

If you know anything about silk screening, you will know that ink is laid on one end of the screen then pulled across the design with a squeegee. We’ll be doing the same thing!

Place the screen stencil side down on the fabric. Here is another opportunity to run your hand across the mesh to make sure the stencil is evenly adhered. 

Make sure to spread your paint evenly and all the way to the edges of the frame. 

Spreading printing ink

This is the biggest piece of advice when screen printing: Press hard! Pressing hard will help the ink go through the screen and stick to your fabric. You want to squeegee your ink from left to right, pressing hard the whole time. 

Screen printing with a stencil

Don’t be afraid to go over the screen multiple times in order to get the color even. You can also go from top to bottom with the squeegee to cover the entire area. 

Step 4: Reveal the print

Carefully lift up the screen and reveal your first print! Wait for it to dry before continuing with the next step. 

Revealing the print

Step 5: Repeat the print

For this project, we’re going to be creating a repeating pattern that will later become fabric for a hat. Repeating the pattern is easy, simply match up the edges and do a second print. After 2-3 prints, I recommend washing some of the ink off of the screen and drying it, because the mesh will get clogged. 

Repeating a silk screen pattern

If you happen to miss a little when printing, just use a paintbrush and a little bit of printing ink to connect missing areas. 

Step 6: Add some details!

These worms needed faces! So with an acrylic paint pen I added some little smiley faces and details. So cute!

Adding wormy details

Step 7: Sew up the hat

Before cutting up the fabric, we recommend ironing the design to heat-seal it into the weave of the fabric. 

We used the pattern and tutorial found here. We’re stencil experts, not sewing experts, so we recommend you follow their instructions

Finished worm hat

Woohoo, we’re done! We started out with a stencil and some fabric, and now we have a new accessory that we’ve made from scratch. If you have any questions, feel free to email us or DM us on social media. Happy stenciling!

1 comment

I want to update on how you use the stencil

JOSEPHA TAMETALONG

Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Read more

STENCIL STOP | ALL ABOUT ADHESIVES: OUR GUIDE TO USING ADHESIVE STENCILS
adhesive

All About Adhesives: Our Guide to Using Adhesive Stencils

You may be familiar with our classic mylar stencils, but do you know about our custom adhesive stencils? They’re a little bit different, let’s learn how!

Read more
STENCIL STOP | How to Use Bullet Journal Stencils
beginner

How to Use Bullet Journal Stencils

Bullet journal stencils are meant to help you manage your life, whether you currently use a planner or not. They save time and provide numerous organizational elements. Check out our blog post for ...

Read more